Smart Worm There are 10 products.

  • Adjustable Fixing for WP06

    WF061608

    Placed in the ejector plate, this unit allows adjustments in height of the WP ±2mm. Enables fine tuning of the WP with the ejection mounted. Allows WP replacement without stripping the base plate out.

    Placed in the ejector plate, this unit allows adjustments in height of the WP ±2mm....

    Placed in the ejector plate, this unit allows adjustments in height of the WP ±2mm. Enables fine tuning of the WP with the ejection mounted. Allows WP replacement without...

  • Adjustable Fixing for WP08

    WF081608

    Placed in the ejector plate, this unit allows adjustments in height of the WP ±2mm. Enables fine tuning of the WP with the ejection mounted. Allows WP replacement without stripping the base plate out.

    Placed in the ejector plate, this unit allows adjustments in height of the WP ±2mm....

    Placed in the ejector plate, this unit allows adjustments in height of the WP ±2mm. Enables fine tuning of the WP with the ejection mounted. Allows WP replacement without...

  • Smart Worm Lifter Ø8 x 100

    WL080100

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Supplied extension and guiding base avoid undesired unscrewing.Good addition to our CUMSA DR system.Easy assembly and installation.Fixing system simplifies installation and allows ±2mm lifter height adjustment.

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6...

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Supplied extension and guiding base...

  • Smart Worm Lifter Ø8 x 125

    WL080125

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Supplied extension and guiding base avoid undesired unscrewing.Good addition to our CUMSA DR system.Easy assembly and installation.Fixing system simplifies installation and allows ±2mm lifter height adjustment.

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6...

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Supplied extension and guiding base...

  • Smart Worm Lifter Ø12 x 100

    WL120100

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Supplied extension and guiding base avoid undesired unscrewing.Good addition to our CUMSA DR system.Easy assembly and installation.Fixing system simplifies installation and allows ±2mm lifter height adjustment.

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6...

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Supplied extension and guiding base...

  • Smart Worm Lifter Ø12 x 125

    WL120125

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Supplied extension and guiding base avoid undesired unscrewing.Good addition to our CUMSA DR system.Easy assembly and installation.Fixing system simplifies installation and allows ±2mm lifter height adjustment.

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6...

    Release small undercuts within 100 or 125mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Supplied extension and guiding base...

  • Smart Worm Pin Ø6 x 30

    WP060030

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Fully mechanical solution.Easy assembly and installation.

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6...

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Fully mechanical solution.Easy assembly...

  • Smart Worm Pin Ø6 x 60

    WP060060

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Fully mechanical solution.Easy assembly and installation.

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6...

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Fully mechanical solution.Easy assembly...

  • Smart Worm Pin Ø8 x 30

    WP080030

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Fully mechanical solution.Easy assembly and installation.

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6...

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Fully mechanical solution.Easy assembly...

  • Smart Worm Pin Ø8 x 60

    WP080060

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Fully mechanical solution.Easy assembly and installation.

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6...

    Release small undercuts within 30 or 60mm of ejection stroke.Allows angles up to 6 degrees.Customizable insert gives freedom to moldmaker.Fully mechanical solution.Easy assembly...