> PRODUCTS>EJECTION

EJECTION There are 91 products.

  • External Synchronized Plates EZ ø14

    EZ140608

    Allow synchronized mold plates openings,regardless of their location.Simple external installation, enables easyadjusting and maintenance.

    Allow synchronized mold plates openings,regardless of their location.Simple external...

    Allow synchronized mold plates openings,regardless of their location.Simple external installation, enables easyadjusting and maintenance.

  • External Synchronized Plates EZ ø20

    EZ200812

    Allow synchronized mold plates openings,regardless of their location.Simple external installation, enables easyadjusting and maintenance.

    Allow synchronized mold plates openings,regardless of their location.Simple external...

    Allow synchronized mold plates openings,regardless of their location.Simple external installation, enables easyadjusting and maintenance.

  • Latch Lock 22x66

    GS226616

    Designed for two steps opening moulds. The gradual scale allows selection of the first opening. The priority of opening  depends on position of assembly.

    Designed for two steps opening moulds. The gradual scale allows selection of the first...

    Designed for two steps opening moulds. The gradual scale allows selection of the first opening. The priority of opening  depends on position of assembly.

  • Latch Lock 36x86

    GS368619

    Designed for two steps opening moulds. The gradual scale allows selection of the first opening. The priority of opening  depends on position of assembly.

    Designed for two steps opening moulds. The gradual scale allows selection of the first...

    Designed for two steps opening moulds. The gradual scale allows selection of the first opening. The priority of opening  depends on position of assembly.

  • Latch Lock 42x106

    GS421024

    Designed for two steps opening moulds. The gradual scale allows selection of the first opening. The priority of opening  depends on position of assembly.

    Designed for two steps opening moulds. The gradual scale allows selection of the first...

    Designed for two steps opening moulds. The gradual scale allows selection of the first opening. The priority of opening  depends on position of assembly.

  • Dog Lifter Limiter DG

    LD122130

    Designed to function with just one set of ejector plates, saving costs and reducing the size of the tool. Undercuts of up to 26mm with just 56mm stroke.

    Designed to function with just one set of ejector plates, saving costs and reducing the...

    Designed to function with just one set of ejector plates, saving costs and reducing the size of the tool. Undercuts of up to 26mm with just 56mm stroke.

  • Dog Lifter Limiter DB

    LD142130

    Designed to function with just one set of ejector plates, saving costs and reducing the size of the tool. Undercuts of up to 26mm with just 56mm stroke.

    Designed to function with just one set of ejector plates, saving costs and reducing the...

    Designed to function with just one set of ejector plates, saving costs and reducing the size of the tool. Undercuts of up to 26mm with just 56mm stroke.

  • Threaded Limiter LR 6

    LR061620

    Limits the stroke of a threaded lifter with respect to the ejector stroke. Enables two stage ejection with only one ejector plate. All movements are 90° to the parting line. Minimum space required for installation.

    Limits the stroke of a threaded lifter with respect to the ejector stroke. Enables two...

    Limits the stroke of a threaded lifter with respect to the ejector stroke. Enables two stage ejection with only one ejector plate. All movements are 90° to the parting line....

  • Threaded Limiter LR 8

    LR081620

    Limits the stroke of a threaded lifter with respect to the ejector stroke. Enables two stage ejection with only one ejector plate. All movements are 90° to the parting line. Minimum space required for installation.

    Limits the stroke of a threaded lifter with respect to the ejector stroke. Enables two...

    Limits the stroke of a threaded lifter with respect to the ejector stroke. Enables two stage ejection with only one ejector plate. All movements are 90° to the parting line....

  • Threaded Limiter LR 10

    LR101620

    Limits the stroke of a threaded lifter with respect to the ejector stroke. Enables two stage ejection with only one ejector plate. All movements are 90° to the parting line. Minimum space required for installation.

    Limits the stroke of a threaded lifter with respect to the ejector stroke. Enables two...

    Limits the stroke of a threaded lifter with respect to the ejector stroke. Enables two stage ejection with only one ejector plate. All movements are 90° to the parting line....

  • Internal Latch Lock

    MX143662

    Controls two stage opening of the tool. Internal mechanism. Reduced space required for installation. Developed for small/medium tools. Can also be used to control two sets of ejection plates for two stage ejection.

    Controls two stage opening of the tool. Internal mechanism. Reduced space required for...

    Controls two stage opening of the tool. Internal mechanism. Reduced space required for installation. Developed for small/medium tools. Can also be used to control two sets of...

  • Plate Retainer Ø26

    PR263230

    Guarantees that the second opening stays closed until the first is completely open. 50 Kg. opening load required per unit (Minimum of 2 parts required). Possibility to change inner spring from the parting line.

    Guarantees that the second opening stays closed until the first is completely open. 50...

    Guarantees that the second opening stays closed until the first is completely open. 50 Kg. opening load required per unit (Minimum of 2 parts required). Possibility to change...

  • Modular Clip

    RM651608

    Useful for moulds that require delayed opening of parting line. Resistance can be increased by adding clips.

    Useful for moulds that require delayed opening of parting line. Resistance can be...

    Useful for moulds that require delayed opening of parting line. Resistance can be increased by adding clips.

  • Stroke Limiter

    SL602008

    Stroke mechanical limiter.

    Stroke mechanical limiter.

    Stroke mechanical limiter.

  • Superior Plate Separator Ø25

    SX256062

    The rear plates stop and the upper plates continue to the full ejection stroke. As the assembly of the units is not in the center of the mold, but within the ejector frame, the space required for installation is drastically reduced. Developed for medium/large tools. Can also be used to control two stage opening of the tool.

    The rear plates stop and the upper plates continue to the full ejection stroke. As the...

    The rear plates stop and the upper plates continue to the full ejection stroke. As the assembly of the units is not in the center of the mold, but within the ejector frame, the...

  • Compact Double Ejection

    SY327054

    The upper ejector plate stops when reaching the core plate, and the rear plate continues until it reaches the upper plate. As the assembly of the units is not in the center of the mold, but within the ejector frame, the space required for installation is drastically reduced. Developed for medium / large tools. Double ejection up to 56mm.

    The upper ejector plate stops when reaching the core plate, and the rear plate...

    The upper ejector plate stops when reaching the core plate, and the rear plate continues until it reaches the upper plate. As the assembly of the units is not in the center of...

  • Shock Absorber

    TA280806

    Used to minimize the vibrations caused by the ejector plates returning to position. The main advantage is the increase in the life of parts within the ejector frame through the reduction of damage and wear.

    Used to minimize the vibrations caused by the ejector plates returning to position. The...

    Used to minimize the vibrations caused by the ejector plates returning to position. The main advantage is the increase in the life of parts within the ejector frame through the...

  • Headless Ej. Sleeve Ø6x400

    TE063400

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø6x500

    TE063500

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø6x600

    TE063600

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø6x800

    TE063800

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø10x400

    TE106400

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø10x500

    TE106500

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø10x600

    TE106600

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø10x800

    TE106800

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø12x400

    TE128400

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø12x500

    TE128500

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø12x600

    TE128600

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Headless Ej. Sleeve Ø12x800

    TE128800

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths are up to 800 millimeters.

    Are a similar design to the headless ejectors but with the advantage that you always...

    Are a similar design to the headless ejectors but with the advantage that you always keep the same friction area as the pin is cut from the base to suit the application. Lengths...

  • Magnetic Safety Stopper Ø10

    TM102214

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily removed to release the grip on the pins when required.

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily...

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily removed to release the grip on the pins when required.

  • Magnetic Safety Stopper Ø12

    TM122214

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily removed to release the grip on the pins when required.

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily...

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily removed to release the grip on the pins when required.

  • Magnetic Safety Stopper Ø15

    TM152214

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily removed to release the grip on the pins when required.

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily...

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily removed to release the grip on the pins when required.

  • Magnetic Safety Stopper Ø20

    TM202214

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily removed to release the grip on the pins when required.

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily...

    This is a safety stop to prevent the actuation of the ejector bases. It can be easily removed to release the grip on the pins when required.

  • Ejector Plate Spacer Ø20

    TR204008

    Spacer to avoid damage to the hoses, assuring the correct height for the water circuits to work freely.

    Spacer to avoid damage to the hoses, assuring the correct height for the water circuits...

    Spacer to avoid damage to the hoses, assuring the correct height for the water circuits to work freely.

  • Ejector Plate Spacer Ø40

    TR404008

    Spacer to avoid damage to the hoses, assuring the correct height for the water circuits to work freely.

    Spacer to avoid damage to the hoses, assuring the correct height for the water circuits...

    Spacer to avoid damage to the hoses, assuring the correct height for the water circuits to work freely.

  • Headless Ejector Pin Ø3x600

    VE030600

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin can be cut from this rod thus eliminating the need to stock various different ejector pins.

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin...

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin can be cut from this rod thus eliminating the need to stock various different ejector pins.

  • Headless Ejector Pin Ø8x1000

    VE081000

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin can be cut from this rod thus eliminating the need to stock various different ejector pins.

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin...

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin can be cut from this rod thus eliminating the need to stock various different ejector pins.

  • Headless Ejector Pin Ø10x600

    VE100600

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin can be cut from this rod thus eliminating the need to stock various different ejector pins.

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin...

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin can be cut from this rod thus eliminating the need to stock various different ejector pins.

  • Headless Ejector Pin Ø10x800

    VE100800

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin can be cut from this rod thus eliminating the need to stock various different ejector pins.

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin...

    These are hardened rods with lhts of up to 1meter. The required length of ejector pin can be cut from this rod thus eliminating the need to stock various different ejector pins.